Cryo-PC PCI-E X8 2- Port NVMe M.2 M-Key Extended Card
- Availability: In stock (10)
Product description
- Brand:Cryo-PC
- UPC:643361985700
- Article number:CPC-98570
- Availability: In stock (10)
Description
This PCIe x8 2-Port Hyper M.2 NVMe SSD Adapter is connects directly to the motherboard, It has support with ultra-fast PCI Express V3.0 X8 lanes transmit bandwidth up to 64Gb/s, through Hyper M.2 technology is used to connect multiple SSDs , then it can be support with two M.2 PCIe protocol NVMe SSD drive . By this adapter can be improved system speed ,and improved the efficiency of office and entertainment.
Specification
- Compliant with PCI Express specification Revision v3.0
- PCI Express interface x8 bandwidth with 64Gb/s
- Support for two M.2 M Key PCIe Protocol NVMe SSD Drive
- Support M.2 M key SSD Drive size:2230,2243,2260,2280,22110mm
- Each port support transmission speeds up to 4GB/s
- Onboard with LED indictor
- The M.2 SSD gets its power supply form the motherboard PCIe BUS
- It must need your motherboard support PCIe 3.0 bifurcation function
- Industrial operating temperature range:-40~85°C
- Support operating system:WindowsR11,Windows10,WindowsR 8,WindowsR1, Windows RServer 2012 R2,Linux, Fedora, SUSE, Ubuntu, Red hat native drivers support PCIe NVMe
- No driver is required because the driver is transparent to the operating system, need to support NVMe protocol
Package content
1 x PCIe x8 2-Port Hyper M.2 NVMe SSD Adapter
- 1 x User’s Manual
System Requirements
- WindowsR11, WindowsR10,WindowsR 8,WindowsR1, Windows RServer 2012 R2,Linux 32bit or 64 bit
- One available PCI-Express x16 slot
Hardware installation
Please first installed the M.2 SSD into the adapter, then follow these steps:
1.Turn Off the power to your computer.
- Unplug the power cord and remove your computer’s cover.
- To install the card, carefully align the card’s bus connector with the selected PCIe slot on the motherboard. Push the board down firmly.
- Replace the slot bracket’s holding screw to secure the card.
- Replace the computer cover and reconnect the power cord.
More information and settings please refer to the User Guides or you can contact us.
Motherboard BIOS Setting
Please refer to your motherboard instructions before setting up, or you can ask your motherboard vendor if the motherboard support PCIe x16 bifurcation function. Because the BIOS of most motherboards defaults to PCIe in X16 mode. so we must set it at the boot time. And different motherboard setup are also different, please refer your motherboard user’ manual for details
*NOTE: Before you buy the PCIe X8 2-Port Hyper M.2 NVMe SSD Adapter expansion card, please
Please note that although the adapter card provides two M.2 slots. the number of M.2 SSD that your motherboard can read is determined by your motherboard and CPU.